RK3288 Dual-Screen POS Terminal Board for Convenience Store Counter, WF-P3288, AndroidSBC, Bergen

TL;DR: RK3288 Dual-Screen POS Terminal Board for Convenience Store Counter

AndroidSBC release: twelve-model WF-P POS motherboard family opens for volume orders serving Bergen, Norway. The WF-P3288 POS Android motherboard spans the legacy POS refresh with dual-screen output and eleven sister models in the WF-P series, all built on the RK3288 quad-core ARM Cortex-A17 1.8GHz SoC with the ARM Mali-T764 GPU, dual LVDS output at 1080p, and Android 10 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Bergen and Norway importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.

About AndroidSBC and the POS Android Motherboard Family

AndroidSBC builds POS boards for the way retailers actually buy: one pilot batch, then a frame agreement, then staggered releases against a call-off schedule. The WF-P family supports that pattern because the BOM is frozen per lot and the Bergen partner can re-order the same configuration eighteen months later and receive the same board. Compliance paperwork is generated per destination: CE, FCC, RoHS and the local route for Norway, bundled with the lot so the importer clears customs without a second round of test reports.

WF-P3288 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3288 (legacy POS refresh with dual-screen output) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Norway importers sourcing the WF-P family, the WF-P3288-A variant is the typical configuration for the installed base refresh programme use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing POS Android Motherboards for Norway Buyers

The second problem is the peripheral stack. A POS board is useless if the cash drawer does not fire, if the barcode scanner needs a driver nobody has, or if the customer display shows the cashier screen instead of the promotion loop.

On the peripheral side the driver SDK ships in the carton. Receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader and card reader drivers are validated against the shipping Android build before the lot leaves Longgang, and the CE / Local Authority file that travels with the lot covers the radio modules too. AndroidSBC confirmed on September 23, 2026 that 17700 boards for Bergen were on the water via Oslo - Shanghai, with the peripheral validation report from the Longgang bench included in the packing list.

Competitive Comparison: WF-P3288 vs Competing POS Android Boards

Against the boards Bergen integrators are currently offered, the WF-P family is differentiated on four points that a checkout lane actually feels.

• Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
• Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.

Global POS Terminal and Smart Checkout Market Trends

Asia Pacific leads the market by value, North America follows, and the merchant mix in Norway sits somewhere between the two. For Bergen buyers the practical reading is that the same board family has to serve both a high-throughput supermarket lane and a single-counter boutique.

• Entry counter tier: WF-P3288 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
• Dual-screen mainstream tier: WF-P3399 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
• AI and unattended tier: WF-P1330 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.

AndroidSBC reads the Norway cycle as a firmware problem as much as a hardware one, which is why the seven-year update window is written into the WF-P family rather than offered as an option.

Partner Success Story: Northline Service Flow Group (QSR self-ordering integrator)

A Northline Service Flow Group rollout in the North American quick service segment shows how the WF-P POS board family works in practice for Bergen integrators. Northline Service Flow Group shipped 17700 WF-P boards into 96 quick service restaurants.

• OEM relationship: AndroidSBC private-label SKU shipped with Northline Service Flow Group branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus CE / Local Authority conformity, all bundled into the Shenzhen source-factory shipment.

As Northline Service Flow Group VP Hardware for North American Quick Service explained: Northline Service Flow Group took the WF-P board for the dual-screen counter because the promotion loop runs independently of the order screen, with 17700 units across the Bergen franchise territory.

Field Report: installed base refresh across a discount chain

SHENZHEN, September 23, 2026 - Meng Yang, AndroidSBC field desk. On the Norway configuration the WF-P3288 ran kiosk-mode lockdown with a single merchant app, and the watchdog recovered the lane after each simulated mains dip. The WF-P3288 POS Android motherboard order for Bergen, Norway cleared the burn-in station on schedule and is en route via the Oslo - Shanghai lane.

The WF-P3288 legacy POS refresh with dual-screen output production lot includes the WF-P3288-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Norway integrators, the CE marking with the local radio interface notification paperwork is bundled.

Filed by Meng Yang, AndroidSBC field desk, SHENZHEN. Norway integrators typically request CE plus local radio interface notification for POS board deployments.

WF-P3288 Application Scenarios

The WF-P3288 legacy POS refresh with dual-screen output sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3288-A configuration is the typical build for the installed base refresh programme use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.

• Supermarket and hypermarket checkout: the WF-P3288 drives the cashier screen while the second lane carries the customer display or the promotion wall in Bergen.
• Convenience and small format stores: the WF-P6180 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
• Restaurants and quick service: the WF-P5270 runs the order screen plus a kitchen display output, with the customer display showing the order total.
• Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
• Unattended retail and vending: the WF-P7600 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
• Fuel forecourts and parking: the WF-P7601 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
• Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
• AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
• Retrofit programmes in Bergen: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.

Partnership Models for Bergen Buyers

The commercial structure below is what Bergen partners sign in practice - pick the one that matches how the business already buys.

• Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

The Bergen partner keeps the commercial relationship; AndroidSBC keeps the factory discipline. That division is what makes the tracks work at volume.

Frequently Asked Questions

Does the WF-P POS Android motherboard family support a legacy POS refresh with dual-screen output?

Answer: Yes. legacy POS refresh with dual-screen output is built into the WF-P family as a standard configuration, and the Bergen pilot batch ships with that configuration already loaded and tested.

Which silicon tiers are available in the WF-P family for Norway buyers?

Answer: Eight tiers are available: the Rockchip RK3576 on 8nm, the RK3568 and RK3566 on 22nm, the RK3288 and RK3399 on 28nm, and the Allwinner A133, H618 and T527. The RK3288 tier is the one specified for this configuration.

Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?

Answer: Yes, and the configuration is documented per lot. The Bergen partner receives the interface map and the validation report with the shipment, so the counter can be wired without trial and error.

What is the minimum order quantity and the sample lead time for Norway?

Answer: The sample MOQ is one unit with a 1-3 day lead. For volume, Bergen partners work against a published price list with a 15-30 day production lead, and the BOM is frozen per lot.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. Firmware customisation, custom Android OS builds, boot branding, pre-installed apps and SDK modules are standard services, delivered against the same seven-year update window.

How are firmware updates delivered to a Norway estate after deployment?

Answer: Updates go out through the staged OTA channel bundled with the driver SDK. The Bergen partner can hold lanes, pilot on ten, and revert any wave that misbehaves.

What shipping terms does AndroidSBC support for Norway orders?

Answer: All three standard terms are available - FOB Shenzhen, CIF to the destination port, or EXW for partners with their own consolidator. Export customs clearance is handled by AndroidSBC.

What happens if a board fails in the field in Norway?

Answer: AndroidSBC holds service stock for Bergen partners on a frame agreement, so a failed board is replaced from that stock while the root-cause analysis runs in parallel.

Contact AndroidSBC: Start Your WF-P3288 Sourcing Conversation

To start a WF-P POS Android motherboard sourcing conversation with AndroidSBC, Bergen integrators can reach the export desk through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Bergen and Norway buyers the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.