Long-term Supply Guide Kiosk Board, WF-G3288, AndroidSBC, Bergen

TL;DR: Long-term Supply Guide Kiosk Board

AndroidSBC export desk: OEM, ODM and distribution tracks open on the WF-G smart guide kiosk board family serving Bergen, Norway. The WF-G3288 smart guide kiosk Android motherboard spans the retail guide kiosk and eleven sister models in the WF-G series, all built on the RK3288 quad-core ARM Cortex-A17 1.8GHz 32-bit SoC with the ARM Mali-T764 GPU, HDMI 1.4 1080p plus LVDS, and Android 10 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Bergen and Norway importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.

About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family

AndroidSBC is the export brand of Wanlin Manufacturing Group, a Shenzhen source-factory group with more than a decade of OEM and ODM work on Rockchip and Allwinner platforms. The smart guide kiosk Android motherboard family covered here is the WF-G line: twelve models across eight silicon options, from the Rockchip RK3588 8nm octa-core tier with the Mali-G610 MP4 GPU and 6 TOPS NPU, through the RK3568 and RK3566 22nm mid tier, the RK3288 and RK3399 28nm legacy tier, and the Allwinner A133, H618 and T527 entry and industrial tiers. The family is aimed at the screens that answer a visitor question: mall floor directories, tenant and product finders, transit and hospital wayfinding, hotel lobby guides, museum exhibit points and outdoor smart city information pillars. That is the workload Bergen and Norway integrators are quoting for, and the WF-G board is the part that decides whether the answer arrives in a second. OEM private label starts at 100 pieces, ODM carrier board work at 500 pieces, and both tracks keep the same seven-year firmware window that applies to the standard Bergen and Norway catalogue SKUs.

WF-G3288 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3288 (retail guide kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Norway importers sourcing the WF-G family, the WF-G3288-A variant is the typical configuration for the legacy retail estate guide terminal refresh use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Norway Buyers

The seventh obstacle is dual-screen behaviour. Directory and promotion terminals need two independent video paths, and Bergen integrators often discover at the site that a board advertised as dual-screen only mirrors the same content to both panels.

Lifecycle is planned at the point of sale. AndroidSBC keeps a seven-year firmware window on the WF-G family, publishes a migration path from the 28nm legacy tiers and the A133 entry tier, and holds buffer stock so Bergen and Norway programmes are not stranded when a platform ages out. CE / Local Authority conformity and the CE marking with the local radio interface notification file set stay versioned alongside. As of September 18, 2026 the Bergen programme stands at 176500 boards booked, the 9th lot to clear the line for Norway and the 9th to route through the Oslo - Shanghai lane.

Competitive Comparison: WF-G3288 vs Competing Smart Guide Kiosk Android Boards

The comparison that matters to Bergen buyers is not board against board but programme against programme, and Norway integrators tend to weigh four things: silicon breadth, driver completeness, unattended-operation features and whether the vendor can carry the software past the first deployment.

• vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
• vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.

Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends

Touch behaviour is the quiet driver. Visitors expect a directory to respond like a phone: multi-touch, portrait or landscape, anti-glare under retail lighting, and a route drawn on screen in under a second. As those expectations spread across Norway venues, the retail guide kiosk board has to carry a calibrated capacitive or IR controller alongside the display and the content client. Analysts tracking Bergen deployments point out that boards with a bundled touch driver package shorten the acceptance path, which is often the longest single item in a kiosk handover.

• Mall floor directories and tenant finders: WF-G3288 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G3399 as the directory plus promotion option.
• Transit, hospital and campus wayfinding banks: the mid-tier WF-G3399 and the industrial WF-G1330 sister SKUs form the public venue ladder, with route planning and multi-language content.
• Promotional walls and in-venue signage networks: WF-G1330 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.

None of this changes the specification logic: Norway venues still buy on touch response, thermal fit and update control, and the market data only sets the volume expectation for Bergen.

Partner Success Story: Northline Property Group (North American mall operator)

A Northline Property Group deployment in the North America retail property segment illustrates how the WF-G guide kiosk board family supports Bergen integrators. Northline Property Group standardised 176500 WF-G directory boards for tenant finders, gift card desks and loyalty points across a regional mall portfolio.

• OEM relationship: AndroidSBC private-label SKU shipped with Northline Property Group branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus CE / Local Authority conformity, all bundled into the Shenzhen source-factory shipment.

Northline Property Group Director of Property Technology for North America Retail noted: Northline Property Group specified the WF-G dual-screen board for its Norway directory desks so the tenant list and the campaign loop run independently, with 176500 units released to the Bergen region in the first wave.

Field Report: legacy estate refresh at a supermarket group

YANTIAN, Shenzhen, September 18, 2026 - Lai Feng, AndroidSBC field desk. Cartons were drop-tested and the WF-G3288 boards re-verified afterwards, with the retail guide kiosk image and the certification label checked against the shipment manifest for Norway. The WF-G3288 smart guide kiosk Android motherboard order for Bergen, Norway cleared the burn-in station on schedule and is en route via the Oslo - Shanghai lane.

The WF-G3288 retail guide kiosk production lot includes the WF-G3288-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Norway integrators, the CE / Local Authority conformity plus CE marking with the local radio interface notification paperwork is bundled.

Filed by Lai Feng, AndroidSBC field desk, YANTIAN, Shenzhen. Norway integrators typically request CE plus local radio interface notification for smart guide kiosk board deployments.

WF-G3288 Application Scenarios

The WF-G3288 retail guide kiosk sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3288-A configuration is the typical build for the legacy retail estate guide terminal refresh use case, with payment-peripheral driver SDK and OTA content management bundled.

• Shopping centre floor directories and tenant finders: WF-G3288 plus WF-G1331 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
• Compact countertop enquiry and price check terminals: WF-G6180 plus WF-G3288 are the usual pairing where housing depth is limited and the BOM target is fixed.
• Transit, hospital and campus wayfinding banks: WF-G5270 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
• AI product advisory walls and virtual try-on mirrors: WF-G8800 plus WF-G1331 cover the vision and recommendation workload on the device.
• Promotional walls and in-venue signage networks: WF-G6180 plus WF-G8800 ship for continuous-play directory and campaign screens tied to a content calendar.
• Hotel, resort and casino lobby directories: WF-G1331 plus WF-G5270 carry the guest orientation flow in Bergen.
• Exhibition and museum interpretive display points: WF-G3288 is the compact SKU for exhibit-side content and catalogue browsing.
• Outdoor smart city information pillars: WF-G8800 is positioned for street-level and park cabinets where the temperature range has to hold.
• Venue programmes running in Bergen: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.

Partnership Models for Bergen Buyers

For Bergen integrators the practical question is whether to buy a catalogue SKU, a private-label SKU or a custom design; AndroidSBC supports all three on the WF-G family in Norway.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

The three tracks exist because Bergen and Norway buyers enter at different stages: some start with a sample board, some with a tender, and some with a private-label programme already sold.

Frequently Asked Questions

Does the WF-G smart guide kiosk Android motherboard family support a retail guide kiosk?

Answer: Yes. The WF-G family ships retail guide kiosk as a stock configuration on Rockchip and Allwinner silicon alike, flashed and functionally tested at the Wanlin Longgang source factory before the lot leaves the line for Norway.

What is the real difference between the RK3288 tier and the other silicon tiers in the WF-G family?

Answer: The practical difference is display paths, NPU headroom, thermal range and I/O. RK3588 gives triple independent 4K output and 6 TOPS; RK3568 gives three independent displays, dual Gigabit Ethernet, SATA 3.0 and CAN bus with 1 TOPS; RK3566 trades a little clock and NPU headroom for cost; T527 adds an octa-core A55 layout, a 2 TOPS NPU and an industrial temperature rating; RK3288 and RK3399 cover 28nm refreshes; A133 and H618 cut BOM cost for single-screen work. AndroidSBC maps RK3288 to the deployment rather than to the headline.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Norway?

Answer: Yes. CE / FCC / RoHS are stock; UKCA, KC, PSE, SAA, UL and CCC are handled per destination. For Norway AndroidSBC bundles CE / Local Authority conformity and CE marking with the local radio interface notification into the same carton that clears Port of Oslo.

What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?

Answer: For Bergen and Norway buyers the entry ladder on the WF-G family is a single sample board at 1-3 days, a private-label pilot from 100 pieces, and an ODM design programme from 500 pieces, with 15-30 day mass production once the specification is frozen.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?

Answer: Yes. Firmware customisation is handled by the same engineers who keep the reference BSP, so a Bergen request for a custom launcher, a locked kiosk mode or an added peripheral driver goes into the maintained branch rather than into a one-off fork.

How are software updates and long-term support handled on the WF-G family?

Answer: AndroidSBC commits to a seven-year firmware update window on the WF-G family. In practice that means security patches, driver updates and content client updates are published on a maintained branch, and Bergen integrators choose when to take them.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?

Answer: Yes. AndroidSBC handles FBA and 3PL consolidation for the WF-G family, including serialised carton labels, pallet plans and the CE / Local Authority documentation set for Norway customs at Port of Oslo.

How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?

Answer: RMA and DOA are handled at the source. DOA boards are replaced from Shenzhen buffer stock on photo or video evidence, and RMA units are repaired or replaced at the Longgang facility with a defined turnaround written into the supply agreement.

Contact AndroidSBC: Start Your WF-G3288 Sourcing Conversation

To start a WF-G smart guide kiosk Android motherboard sourcing conversation with AndroidSBC, a Wanlin Manufacturing Group export brand, Bergen integrators can reach the export desk through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Bergen and Norway the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.