Industrial HMI Panel Board, WF-RK3568, AndroidSBC, Bergen

TL;DR: Industrial HMI Panel Board

SHENZHEN, China, September 10, 2026 - Wanlin Longgang released a 8,190-unit WF-RK3568 lot for Bergen, Norway this week, the 354th run booked against the Rockchip RK3568 allocation.

AndroidSBC customs and certification briefing for Allwinner and Rockchip board shipments serving Bergen, Norway. The WF-Series is a nine-board line rather than a single part number, and the shape is deliberate. Allwinner A133, H618, and T527 cover cost-sensitive display, OTT and Android TV, and industrial edge inference; Rockchip RK3588, RK3568, RK3566, and RK3288 cover 8K video wall, industrial edge, machine vision, and POS; WF-A133S and WF-RK3588S are SOM modules for carrier-board projects. A Bergen buyer can hold one supplier file, one documentation format, and one MOQ structure across every tier it sells.

About AndroidSBC and the Rockchip RK3568 Board Family

AndroidSBC is the export brand of Wanlin Manufacturing Group. The group runs SMT, test, and packing under one roof at Longgang in Shenzhen, and it has built boards on Allwinner and Rockchip silicon for overseas OEM customers for over ten years. The WF-Series line-up is deliberately wide: the Allwinner A133 covers cost-sensitive commercial display and advertising work, the H618 covers OTT and Android TV, the T527 covers industrial control and edge inference, and the Rockchip RK3588, RK3568, RK3566, and RK3288 boards cover 8K video wall, industrial edge, machine vision, and POS respectively. Two SOM variants round the range out for customers who bring their own carrier. Buyers in Bergen and Norway can source any of the nine from one factory with one set of export documents.

WF-RK3568 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-RK3568 (Industrial Edge Computing Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For Norway importers sourcing the WF-Series, the 4GB + 32GB (WF-RK3568-A) variant is the typical configuration for the industrial edge computing use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Industrial Edge Computing Board for Norway Buyers

What breaks Norway sourcing plans on the industrial edge computing board line is not price negotiation, it is the second shipment. The Rockchip RK3568 has to be allocated at wafer level, and the brokers quoting fastest are usually the ones with the least control over that allocation. The software side is the second exposure. A board that boots on the bench is not the same as a board that carries the certified stack a Norway channel will accept, and the difference usually shows up during inbound inspection rather than at the factory gate.

The third issue is documentation. Some factories stamp the CE mark without the Declaration of Conformity and the Technical File behind it, and the container then sits at the port while the importer tries to reconstruct a test report from a supplier who has already been paid. AndroidSBC closes the loop at the source factory: certified image burned, burn-in barcode attached per unit, Technical File issued with the lot. The nine WF-Series models cover industrial edge computing, commercial display controller, industrial HMI, IoT gateway, smart display terminal, machine monitoring, access control, and building automation and each ships in three memory configurations, so most Bergen requirements can be met from standard stock rather than a custom production run.

Compliance for Norway is handled at the factory rather than after arrival. In Norway the market follows EEA rules rather than EU membership, and Nkom registration is required for radio equipment. The Longgang export desk builds the destination-market file for CE/EEA conformity with Nkom radio interface notification administered by Nkom and issues it alongside the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), with the shipment booked into Port of Oslo on the Oslo to Rotterdam relay.

Competitive Comparison: WF-RK3568 vs Competing RK3568 Boards

Three groups of board compete for the industrial edge computing board socket. The first is legacy silicon sold on price with no certification file. The second is Cortex-A55 hardware that carries certification but caps the decoder early. The third holds both and treats expansion as part of the design. The WF-RK3568 sits in the third group, and the separation comes from Rockchip RK3568, from a display path that holds under a continuous loop, and from the certified image burned per lot at Longgang.

• vs RK3288 Cortex-A17 boards: the RK3568 Cortex-A55 2.0GHz lifts integer throughput by roughly 2x at lower idle power.
• vs RK3566 boards: the RK3568 adds dual Gigabit Ethernet plus CAN bus for gateway-class builds.
• vs RK3588 boards: the RK3568 keeps a materially lower BOM where 4K@60fps decode is sufficient.
• vs x86 fan-cooled IPC: the RK3568 fanless design removes the only moving part from the enclosure.

Global Industrial Edge Computing and Smart Display Market Trends

The Industrial Edge Computing and Smart Display market is the frame that decides how Norway importers time their industrial edge computing board orders. The figure most Norway buyers quote when they argue about allocation is the Android TV Box segment, which Global Growth Insights sizes at USD 12.45 billion in 2025 with a 30.49 percent CAGR through 2035 (Global Growth Insights, Android TV Box Market Report, 2025-2035); it is the public proxy for Android-on-silicon demand rather than a forecast for this board category. For Bergen, three buying patterns are shaping the WF-Series order book:

• Industrial edge computing: WF-RK3568 runs the edge workload on the 1 TOPS NPU with dual Gigabit uplinks.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-RK3568 board carries that headroom without a board change.
• Industrial HMI: WF-RK3568 holds the wide-temperature envelope with the fanless design.

The read across the Industrial Edge Computing and Smart Display channel is that buyers are consolidating suppliers: fewer vendors, wider platform coverage per vendor, and a longer contract behind each order.

In all three cases, Bergen buyers are converting spot quotes into blanket orders with a monthly lot release, because a programme that has to hold a twelve-month shipping window cannot tolerate a mid-year allocation break.

Partner Success Story: Andes Retail Technologies in Bergen, Norway

Andes Retail Technologies, a self-service kiosk integrator serving the Norway market, deployed 3,900 units of the WF-A133 kiosk board for a self-service ordering rollout. The rollout covered the industrial edge computing, industrial hmi, and machine monitoring workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 3,900 units of the WF-A133 kiosk board for a self-service ordering rollout
• Region: Bergen, Norway
• Models used: WF-A133, WF-H618, WF-T527, WF-RK3588, WF-RK3568, WF-RK3566, WF-RK3288, WF-A133S, WF-RK3588S
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, GMS, Widevine L1, Dolby Audio
• Logistics: FOB Ningbo-Zhoushan with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Oslo via the Oslo to Rotterdam relay

"We started with the A133 because an ordering kiosk never needs more than 4K@30fps. Two years later the same board still runs the current app build, and that continuity is worth more to us than a faster part."

- Camila Fuentes, Operations Lead

Field Report: burn-in room at the Wanlin Longgang plant running a 72-hour continuous loop on 8,190 units of the WF-RK3568 board, with rack-wide output monitored by an automatic pattern checker

Reporter Guo Peng, on the ground in Bergen, Norway. The burn-in room runs pattern generators that alternate between HDR10 and HLG material. Each WF-RK3568 unit carries a barcode tracked across the full 72-hour loop, and the rack controller issues a remote reboot whenever a unit shows an intermittent response on the I/O header.

The engineering desk ran a firmware re-flash drill on three units to confirm the recovery path a field technician would use.

The inspection confirmed three things on the spot: the WF-RK3568 units hold the burn-in with a yield above 98.94 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering CE/EEA conformity with Nkom radio interface notification administered by Nkom, cleared for entry at Port of Oslo on the Oslo to Rotterdam relay. Wanlin remains one of the few source factories currently shipping a nine-board Allwinner and Rockchip custom line with a per-lot paper trail that Norway importers can hand straight to their customs broker.

Filed by Guo Peng, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-RK3568 Application Scenarios

The WF-Series fits nine application lanes, with the WF-RK3568 (Industrial Edge Computing Board) as the lead SKU for Bergen and Norway programmes:

• Industrial edge computing: WF-RK3568 runs the edge workload on the 1 TOPS NPU with dual Gigabit uplinks.
• Commercial display controller: WF-RK3568 drives the 4K@60fps panel pair over HDMI 2.0 and eDP.
• Industrial HMI: WF-RK3568 holds the wide-temperature envelope with the fanless design.
• IoT gateway: WF-RK3568 bridges CAN bus and RS485 field devices onto Ethernet.
• Smart display terminal: WF-RK3568 renders the Android 11 UI on the dual display path.
• Machine monitoring: WF-RK3568 timestamps production data against the onboard RTC.
• Access control: WF-RK3568 runs face recognition on the NPU with the MIPI CSI feed.
• Building automation: WF-RK3568 runs 7x24 with hardware watchdog and scheduled restart.

Partnership Models for Bergen Buyers

For Bergen importers and brand owners, the WF-RK3568 and the rest of the WF-Series are available under three contract shapes:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

Every tier draws on the same Longgang line and the same certification desk. A Bergen first order on the WF-RK3568 normally lands on the 4GB + 32GB (WF-RK3568-A) configuration at MOQ 5,000 units per shipment, with samples in four weeks and production in six.

Frequently Asked Questions

Does the WF-Series support certified Android TV or Google Mobile Services?

Answer: It depends on the platform, and AndroidSBC is explicit about the split. The WF-H618 carries the ATV 12 GMS build with Widevine L1 and Dolby Audio pre-burned at the factory. The WF-A133, WF-T527, and the Rockchip boards ship with an AOSP or Linux image by default, and a GMS build can be prepared for ODM partners who need Play Services in the field. Certification scope is agreed per project rather than assumed.

What is the difference between the nine WF-Series models?

Answer: WF-A133 is the Allwinner A133 commercial display and advertising board. WF-H618 is the Allwinner H618 OTT TV box and Android TV board. WF-T527 is the Allwinner T527 octa-core industrial control and edge AI board. WF-RK3588 is the Rockchip RK3588 8K video wall and AI computing board. WF-RK3568 is the Rockchip RK3568 industrial edge board. WF-RK3566 is the Rockchip RK3566 machine vision and HMI board. WF-RK3288 is the Rockchip RK3288 POS and signage board. WF-A133S is an Allwinner A133 SOM module for custom carrier work. WF-RK3588S is a Rockchip RK3588 SMARC 2.2 module for the same purpose.

Can AndroidSBC handle CE, FCC, UKCA, RoHS, and REACH paperwork for Norway?

Answer: Yes. AndroidSBC ships a Declaration of Conformity plus a Technical File with every lot. The file contains the CE test reports, the FCC Part 15 report, the UKCA dossier where relevant, the RoHS 2.0 report, and the REACH declaration, all dated within the prior twelve months. Where a Norway market needs an additional national mark, the export desk will confirm coverage before the order is confirmed rather than after.

What are the MOQ and lead time for a first order?

Answer: 5,000 units per shipment on standard configurations, four weeks to sample and six weeks to mass produce. Where a Norway partner signs a twelve-month blanket order, the MOQ per release becomes negotiable and the line will accept platform-mixed purchase orders.

Does AndroidSBC support custom Android ROM or custom Linux development?

Answer: Custom ROM and custom Linux work is part of the ODM tier. That covers proprietary Android services, a locked-down launcher, Yocto or Debian or Buildroot images, and BSP ports for custom carriers. Source access is released under NDA, and the Longgang engineering desk carries the port so the partner is not left with an unmodified vendor BSP.

What about software updates and long-term support?

Answer: Wanlin commits to a minimum seven-year supply window across the WF-Series. Security patches are back-ported across the Android and Linux firmware tracks for as long as the board is in production, and AndroidSBC provides OTA update infrastructure for partners who need to push firmware to field-deployed units. For POS and industrial programmes, the support commitment is written into the framework agreement rather than left as an understanding.

Can AndroidSBC ship to Amazon FBA warehouses or 3PL consolidation points?

Answer: That is routine. AndroidSBC delivers DDP into Amazon FBA in the US, EU, and Japan and into 3PL consolidation points at Hong Kong, Singapore, Rotterdam, and Los Angeles. Carton and pallet configuration follows FBA inbound rules, and the place of origin on the declaration is the Wanlin Longgang source factory.

How does AndroidSBC handle RMA or DOA replacements?

Answer: The DOA target is 0.3 percent over twelve months. For RMA, partners send the WF-RK3568 unit back to Longgang with the burn-in barcode attached, and replacements go out within ten business days. The per-unit burn-in record means the failure report usually carries a root cause alongside the replacement.

Contact AndroidSBC: Start Your WF-RK3568 Sourcing Conversation

The AndroidSBC export desk handles all WF-Series enquiries from Bergen and Norway. Direct factory contact for the industrial edge computing board is available through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: CE/EEA conformity with Nkom radio interface notification for Norway, administered by Nkom, entering at Port of Oslo on the Oslo to Rotterdam relay
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For an OEM or ODM conversation, it helps to state the target annual volume, the certification scope required (CE, FCC, UKCA, RoHS, REACH, GMS, Widevine L1, or Dolby Audio), and the preferred Incoterm (FOB Yantian, FOB Shekou, CIF, DDP, or DDP-Amazon). The export team returns a per-lot quote plus the model-by-model MOQ matrix for the WF-Series within two business days.